What is G and M code in CNC Programming?

G and M codes are numbers and latter that are used to write a CNC programming, CNC machines only understand the G and M codes.this article is about G and M codes.

What is G-Code in CNC programming

Preliminary capacities, called G codes, are utilized to decide the geometry of hardware developments and working condition of the machine controller; capacities, for example, straight cutting developments, penetrating tasks and determining the units of estimation. They are regularly modified toward the beginning of a square. G-code is a programming dialect for CNC that trains machines where and how to move. Most machines talk an alternate “tongue” of g-code, so the codes fluctuate contingent upon the sort, make, and model. Each machine accompanies a guidance manual that demonstrates that specific machine’s code for a particular capacity.G CODE

What is M-code in CNC programming

Various capacities, called M codes, are utilized by the CNC to direction on/off signs to the machine capacities. ie, Mø3 – shaft forward (CW), Mø5 – axle stop, etc…. The capacities distributed to bring down M code numbers are consistent in most CNC controls, in spite of the fact that the higher M code number capacities can change starting with one make of controller then onto the next The line of a program may likewise incorporate m-codes, which are for the most part codes that advise a machine how to play out an activity.

m code

Know more about Vietnam CNC machining here:

Older articles

Sign up to download the profile

Complete your information in the form below

You did not use the site, Click here to remain logged. Timeout: 60 second